Twin filter for iron removal and water softening Ecosoft FU1665CITWIN

☆☆☆☆☆ /5

reviews

Article: FK1665TWIN

466,000.00 L

Përshkrimi

Twin filter for iron removal and water softening Ecosoft FK 1665CE

Tiparet kryesore

Guaranteed to remove yellow color from water

Normalizes water hardness

Pure stable water

5-7 years of operation of the filter material

Low electricity costs

Transporti

Transporti dhe instalimi falas në të gjithë shqipërine

PAGESA

Pagesa bëhet me para në dorë pas përfundimit të instalimit

Informacioni i produktit

The twin filter Ecosoft FK 1665 CE is designed for preparing water for domestic needs. It completely cleans the water from impurities such as iron, organic substances, ammonium and manganese and significantly reduces the content of hardness salts.

It is used in cottages, restaurants, laundries, laundries, breweries, bakeries, for water heating and steam boiler rooms.

CHARACTERISTICS OF THE MODEL
The complex cleaning filter allows you to significantly reduce the costs of purchasing and maintaining a water treatment system. An Ecosoft FK 1665 CE twin filter replaces some specialized installations. The system works automatically and its maintenance is reduced only to the timely addition of tablet salt.

MAIN ADVANTAGES
Guaranteed to remove yellow color from water
Reliable and efficient operation for 5 years (subject to proper operation)
Economical consumption of salt and a small amount of waste water

The filter is connected to the cold water supply pipe, effectively cleans the water and independently controls all its work processes.

Water previously purified from mechanical impurities enters the filter box filled with Ecomix® filter material. The material consists of five components that successively hold iron, manganese, organic impurities and hardness salts. Purified water is supplied to the consumer through the central housing pipe.

After the material source is exhausted, the control valve switches one filter housing to the regeneration mode, the second to the working mode.

recovery
The regeneration is done with purified water and is done in 5 stages, which are clearly programmed and carried out by the valve itself.

The first stage – the system is washed with a reverse flow of water, which allows you to loosen the filter material and wash mechanical impurities from it.
Then, a salt solution is introduced from the tank into the filter housing, it passes through the ion exchange resin, as a result of which the hardness salts are washed from it and together with the remaining solution, they are poured into the sewer.
The next stage (3) is a short rinse, which once again washes the filter material and washes away the residual salt solution.
After the regeneration is complete, the material is washed with a direct stream of water (stage 4).
The final stage (5) is to fill the salt tank with water to dissolve the tableted salt and prepare the solution for future regeneration.

Thanks to the use of a multifunctional valve, the filter does not require constant attention. The only important task of the customer during the service is timely filling with salt. This guarantees effective regeneration of the filter material and, accordingly, continuous water resources and quality.

In case of any other problems, the valve will inform with a text message on the screen with additional output of the contacts of the service center with which you should contact.